Olds Elevator LLC is the exclusive Licensee of the Olds technology
in theUnited States
and
Canada
.
Located in
Hudson
,
New Hampshire
, Olds Elevator LLC provides engineering design, elevator manufacturing,
installation and service.
Olds Elevator LLC offers sublicenses of the Olds technology,
including training and technical support, to qualified,
strategic partners.
The OLDS ELEVATOR Vertical
Bulk Material Conveyor was conceived by inventor
Peter Olds, of Maryborough, in
Queensland
,
Australia
(http://www.oldselevator.com)/ .An engineer who operates a small foundry, Peter
sought a better means to elevate foundry sand 18 feet to
feed a newly acquired automated sand mixing machine.
Dissatisfied with conventional methods --- bucket elevators,
screw elevators, pneumatic conveyers and inclined belt conveyors
--- Peter developed a radical concept that overcomes all
the obstacles of elevating sand in his foundry - using less
than 5 sq. ft. of floor space!
The concept worked immediately on prototypes, then real-world
units. Applications utilizing casings from 6 to 35 feet tall,
with diameters of 2-1/2 to 8 inches elevated up
to 25 tons of material per hour!
In fact, granular products, pellets and powders can be elevated
at surprisingly slow speeds, where centrifugal forces are
not involved. Even manual turning of the casing of the OLDS
ELEVATOR Vertical Conveyor will elevate the product.
This phenomenon opens the door for applications where easily
damaged products can now be elevated without concern.
The many performance advantages and economics of the revolutionary
OLDS ELEVATOR technology are compelling. And, the potential
applications are limited only by your imagination.
*Patent Pending |
